Anritsu MS2712E Spectrum Master Analyzer w/ Opts 9/31/541/542 GPS Receiver

Description

ebay template
The Following Items Are Included:
Anritsu MS2712E Spectrum Master (BC# 40842-L/T*)
Installed Options:
9: 20 MHz BW Demod
31: GPS Receiver
541: RF LTE Signal Analyzer
542: Modulation LTE Signal Analyzer
Armored Test Port Cable
(2) BNC Cables
USB PC Interface Cable
AC Adapter/Charger
Power Cord
DC Car Charger
User Manual On CD-ROM
Carrying Case (G)
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
This Item Has A Current Calibration!
Anritsu MS2712E HandHeld Spectrum Master Analyzer w/ Options
Installed Options:
- 9: 20 MHz BW Demod
- 31: GPS Receiver
- 541: RF LTE Signal Analyzer
- 542: Modulation LTE Signal Analyzer
Whether it is for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, or Wi-Fi and wireless network measurements, the Spectrum Master is the ideal instrument for making fast and reliable measurements
Frequency Range: 100 kHz to 4 GHz
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent
Condition: Refurbished
Calibrated: Yes
Warranty: 1 YEAR WARRANTY
Anritsu MS2712E Spectrum Analyzer
Anritsu introduces its next generation compact handheld Spectrum Analyzers to meet the needs for portability. Whether it is for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, or Wi-Fi and wireless network measurements, the Spectrum Master is the ideal instrument for making fast and reliable measurements.
Highlights
:
Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I
Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID
Dynamic Range: > 95 dB in 10 Hz RBW
DANL: -152 dBm in 10 Hz RBW
Phase Noise: -100 dBc/Hz max @ 10 kHz offset at 1 GHz
Frequency Accuracy: < ±50 ppb with GPS On
2-port Transmission Measurements: High/Low Power
Traces: Normal, Max Hold, Min Hold, Average, # of Averages
Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas
Limit Lines: up to 41 segments with one-button envelope creation
Trace Save-on-Event: crossing limit line or sweep complete
Capabilities
:
GSM/EDGE, W-CDMA/HSDPA, TD-SCDMA, CDMA/EV-DO
WiMAX-Fixed, Mobile
LTE
ISDB-T, ISDB-T SFN
Store 2000 Traces internally
Gated Sweep
CW Signal Generator
Internal Preamplifier standard
Internal Bias-Tee
Internal Power Meter
High Accuracy Power Meter
GPS tagging of saved traces
4, 6, 8, 18 GHz Power Sensors
Channel Scanner
< 5 minute warm-up time
3 hour battery operation time
Touchscreen keyboard
USB Data Transfer
Master Software Tools
Specifications:
Spectrum Analyzer
Measurements
Smart Measurements
Field Strength (uses antenna calibration tables to measure dBm/m2 or dBmV/m)
Occupied Bandwidth (measures 99% to 1% power channel of a signal)
Channel Power (measures the total power in a specified bandwidth)
ACPR (adjacent channel power ratio)
AM/FM/SSB Demodulation (wide/narrow FM, USB and LSB), (audio out only)
C/I (carrier-to-interference ratio)
Setup Parameters
Frequency
Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #, Channel Increment
Amplitude
Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection
Span
Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span
Bandwidth
RBW, Auto RBW, VBW, Auto VBW, RBW/WBW, Span/RBW
File
Save, Recall, Delete, Directory Management
Save/Recall
Setups, Measurements, Limit Lines, Screen Shots Jpeg (save only), Save-on-Event
Save-on-Event
Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All
Delete
Selected File, All Measurements, All Mode Files, All Content
Directory Management
Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB
Application Options
Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)
Sweep Functions
Sweep
Single/Continuous, Manual Trigger, Reset, Detection, Minimum Sweep Time, Trigger Type,
Gated Sweep (see Option 0090)
Detection
Peak, RMS, Negative, Sample, Quasi-peak
Triggers
Free Run, External, Video, Change Position, Manual
Trace Functions
Traces
Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations
Trace A Operations
Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace)
Trace B Operations
A → B, B←→C, Max Hold, Min Hold
Trace C Operations
A → C, B←→C, Max Hold, Min Hold, A - B → C, B - A → C, Relative Reference (dB), Scale
Marker Functions
Markers
Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers,
Marker Table (On/Off), All Markers Off
Marker Types
Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker
Marker Auto-Position
Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel,
Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level
Marker Table
1-6 markers frequency and amplitude plus delta markers frequency amplitude and offset
Limit Line Functions
Limit Lines
Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit
Limit Line Edit
Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right
Limit Line Move
To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1
Limit Line Envelope
Create Envelope, Update Amplitude, Points (41 max), Offset, Shape Square/Slope
Limit Line Advanced
Type (Absolute/Relative), Mirror, Save/Recall
Frequency
Frequency Range
100 kHz to 4 GHz
Maximum Continuous Input
+26 dBm
Tuning Resolution
1 Hz
Frequency Reference
Aging: ±1.0 ppm/year
Accuracy: ±1.5 ppm (25 °C ±25 °C) + aging, < ±50 ppb with GPS On
Frequency Span
10 Hz to 4 GHz including zero span
Sweep Time
Minimum 100 ms, 10 µs to 600 seconds in zero span
Sweep Time Accuracy
±2% in zero span
Bandwidth
Resolution Bandwidth (RBW)
10 Hz to 3 MHz in 1–3 sequence ±10% (1 MHz max in zero-span) (–3 dB bandwidth)
Video Bandwidth (VBW)
1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) (auto or manually selectable)
RBW with Quasi-Peak Detection
200 Hz, 9 KHz, 120 kHz (–6 dB bandwidth)
VBW with Quasi-Peak Detection
Auto VBW is On, RBW/VBW = 1
Spectral Purity
SSB Phase Noise @ 1 GHz
-100 dBc/Hz, -110 dBc/Hz typical @ 10 kHz offset
-105 dBc/Hz, -112 dBc/Hz typical @ 100 kHz offset
-115 dBc/Hz, -121 dBc/Hz typical @ 1 MHz offset
Amplitude Ranges
Dynamic Range
>95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW
Measurement Range
DANL to +26 dBm
Display Range
1 to 15 dB/div in 1 dB steps, ten divisions displayed
Reference Level Range
-130 dBm to +30 dBm
Attenuator Range
0 to 55 dB in 5 dB steps
Amplitude Units
Log Scale Modes: dBm, dBV, dBmv, dBμV
Linear Scale Modes: nV, μV, mV, V, kV, nW, μW, mW, W, kW
Amplitude Accuracy
100 kHz to 4.0 GHz
±1.25 dB, ±0.5 dB typical
>4.0 GHz to 6 GHz
±1.50 dB, ±0.5 dB typical
Displayed Average Noise Level (DANL)
Preamp Off
(Reference level -20 dBm)
Preamp On
(Reference level -50 dBm)
(RBW Normalized to 1 Hz, 0 dB attenuation)
Maximum
Typical
Maximum
Typical
10 MHz to 2.4 GHz
-141 dBm
-146 dBm
-157 dBm
-162 dBm
>2.4 GHz to 4 GHz
-137 dBm
-141 dBm
-154 dBm
-159 dBm
>4 GHz to 5 GHz
-134 dBm
-138 dBm
-150 dBm
-155 dBm
> 5 GHz to 6 GHz
-126 dBm
-131 dBm
-143 dBm
-150 dBm
(RBW = 10 Hz, 0 dB attenuation)
10 MHz to 2.4 GHz
-131 dBm
-136 dBm
-147 dBm
-152 dBm
>2.4 GHz to 4 GHz
-127 dBm
-131 dBm
-144 dBm
-149 dBm
>4 GHz to 5 GHz
-124 dBm
-128 dBm
-140 dBm
-145 dBm
> 5 GHz to 6 GHz
-116 dBm
-121 dBm
-133 dBm
-140 dBm
Spurs
Residual Spurious
<-90 dBm (RF input terminated, 0 dB input attenuation, > 10 MHz)
Input-Related Spurious
<-75 dBc (0 dB attenuation, -30 dBm input, span <1.7 GHz, carrier offset >4.5 MHz)
Exceptions, typical
<-70 dBc @ <2.5 GHz, with 2072.5 MHz Input
<-68 dBc @ F1-280 MHz with F1 Input
<-70 dBc @ F1 + 190.5 MHz with F1 Input
<-52 dBc @ 7349-2F2 MHz, with F2 Input, where F2 < 2424.5 MHz
<-55 dBc @ 190.5 ± F1/2 MHz, F1 <1 GHz
Third-Order Intercept (TOI)
Preamp Off (-20 dBm tones 100 kHz apart, 10 dB attenuation)
800 MHz
+16 dBm
2400 MHz
+20 dBm
200-2200 MHz
+25 dBm, typical
>2.2 GHz to 5.0 GHz
+28 dBm, typical
>5.0 GHz to 6.0 GHz
+33 dBm, typical
Second Harmonic Distortion
Preamp Off, 0 dB input attenuation, -30 dBm input
50 MHz
-56 dBc
>50 MHz to 200 MHz -
-60 dBc, typical
>200 MHz to 3000 MHz
-70 dBc, typical
VSWR
2:1, typical
For full Anritsu MS2712E product specifications, please click here:
Anritsu MS2712E
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with Kyozou.
Inventory and Ecommerce Management