N1201SA Antenna Analyzer Tester for UV RF Vector Impedance

Description

N1201SA Antenna Analyzer Tester for UV RF Vector Impedance
Welcome contact for available wholesale price, thank you!
Product Description：
Features:
* This instrument has four interfaces: single point measurement, scanning, information, correction and calibration
* By default, the enters the single-point measurement interface upon startup.
* Aluminum alloy shell to extend service life.
* Note: For user convenience, each calibration correction option will automatically change to user calibration. At the same time, in order to ensure the integrity of the calibration, during the calibration process, there is an automatic shutdown function when a fault occurs, and the power is always turned on.
Startup and shutdown:
* Hold down the CTRL key without pressing the power switch button.
* When the power is on, press and hold (more than 2S) the switch button. After releasing it, the instrument will shut down.
* When the power is on, press and hold (more than 2S) the switch button. After releasing it, the instrument will shut down.
Recommendations for use:
* In order to ensure the accuracy of measurement and calibration, the instrument must be warmed up for at least 15 minutes.
* Try to use high-quality RF cables and connectors.
* Those marked with calibration cables can be used directly without calibration.
* The test cable process affects the measurement accuracy. It is recommended not to choose a test cable that is too long when possible.
* Before measuring and calibrating, please make sure you are not in a strong wireless signal to avoid interference and inaccurate measurements.
* If you don’t understand the impedance measurement itself, you can refer to the instructions and tutorials of the vector network analyzer. This instrument is equivalent to a single-port vector network analyzer.
Specification:
Model: PS100
Working frequency: 137.5MHz~2700MHz
Step frequency: 1kHz
Display: 2.4-inch TFT, resolution 320*240 (QVGA)
Power consumption<1.5W
Charging current: 400mA
Charging port: USB
Automatic shutdown: can be set for 5-60 minutes
Measured parameters: impedance, reactance, SWR and S11
Resolution: 4 digit reading
Frequency accuracy: <±10ppm
Connector: SMA-K
Impedance measurement range:
1Ω~1000Ω@frequency<1300MHz;
1Ω~300Ω @frequency>1300MHz (absolute value of impedance)
Standing wave measurement range:
1~65@frequency<1300MHz;
1~10@frequency>1300MHz
S11(dB) measurement range: 0dB to -50dB
Error (single point measurement):
For impedance:
For standing waves: < effective reading x 10%±0.1
For S11: 0.1dB/5° (0dB to -10dB)
For (dB/°): 1dB/10° (-10dB to -20dB); 5dB/20° (-20dB to -40dB)
Directivity: < 35dB (140MHz to 2GHz after calibration); < 30dB (2GHz to 2.7GHz)
Scan points: 280
Output level: -18dBm
Working temperature: 0℃ to 40℃
Atmospheric pressure: 860hPa~1060hPa
Estimated Delivery Time：
We will ship within 1-5 business days after payment.
Standard: 7-14 business days
Expedited(
UPS/DHL/FedEx
): 4-7
business days
Note: Average delivery time for reference only, actual time varies for different countries and related to uncontrollable factors such as weather, natural disasters and pandemic.
Warranty：
Exchange/replace item within 30 days counting from the day you receive merchandise.
Buyer pay the return shipping cost.
Exchange/replace item should be new.
Import Duties：
Our selling price does NOT include your import duties & fess charged by customs, please advise how much value we can show on invoice for expedited shipping.
Customer Support：
Beijing time: Monday to Friday 9:00am to 6:00pm（Our working time）
If you
send email to us
,in our working hours will be resumed within 24 hours.
If you have any questions regarding the transaction, before leaving any feedbacks,please tell us and give us an opportunity to find a solution, thank you!