PS100 SWR Antenna Analyzer Meter Tester, 137.5MHz - 2.7GHz UV RF Vector

Description

30 Days Return Policy
Fast Delivery
Trusted seller
PS100 SWR Antenna Analyzer Meter Tester, 137.5MHz - 2.7GHz UV RF Vector
Product Description
Four Interfaces --- This instrument has single point measurement, scanning, system information, correction and calibration.The default boot into single-point measurement interface.
Startup & Shutdown --- Hold down the CTRL key off press the power switch button.The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Operating Frequency --- 137.5MHz~2700MHz, display 2.4-inch TFT, resolution 320*240 (QVGA) .
Note --- Measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.If the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis.
Default Setting --- For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Specifications: Working Frequency: 137.5MHz〜2700MHz Stepped Frequency: 1kHz Display: 2.4inch TFT with resolution 320*240(QVGA) Power Consumption ＜ 1.5W Charging Current: 400mA Charging Port: USB Auto Power Off: Settable 5-60minutes Measured Parameters: Impedance, reactance, SWR and S11 Resolution: 4-digit readings Frequency Accuracy: ＜±10ppm Connector: SMA-K -Impedance Measurement Range: 1Ω~1000Ω frequency ＜ 1300MHz 1Ω~300Ω frequency ＞1300MHz (Impedance Absolute Value) - Standing Wave Measurement Range: 1~65 frequency ＜ 1300MHz 1~10 frequency ＞1300MHz - S11(dB)Measurement Range: 0dB to -50dB - Error (Single-point measurement): For Impedance: ＜ Impedance absolute value x 5%±0.1Ω (Z＜200Ω, ＜1.5GHz) For Standing Wave: ＜ Effective readings x 10%±0.1 For S11: 0.1dB/5° (0dB to -10dB) For (dB/°): 1dB/10° (-10dB to -20dB); 5dB/20° (-20dB to -40dB) - Directivity: ＜35dB (140MHz to 2GHz after calibration); ＜ 30dB (2GHz to 2.7GHz) - Scanning Points: 280 - Output Level: -18dBm - Working Temperature: 0â to 40â;Atmospheric Pressure: 860hPa~1060hPa Advice When Using: In order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.Try to use good quality RF cable and connectors.Calibrated cable marked to the next may not need to calibrate and direct use.Test cable process affect the measurement accuracy, it is recommended that, w possible, do not choose too long test cable.
Shipping
Returns
Payment
Shipping
Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states. All our stock ships from US-based warehouses. Shipped via USPS or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24-72 hours of your payment being processed. Check our feedback to see the great reviews of FAST shipping we offer.
Returns
As our valued customer, we will do our best to make sure the product you receive arrives to you on time and as expected. If you are not satisfied with your purchase, please contact us within 30 days of receiving your order to process a return.
Payment
We currently accept payment via PayPal only. Once payment is cleared, we will dispatch your shipment within 1-3 business days. Please refer to the "Shipping" tab for more information regarding shipping speed to your destination.