RFP (RDF PRODUCTS) DFP-1010/IF(15/30) RS-232 DF ANTENNA BEARING PROCESSOR

Description

RFP DFP-1010/IF(15/30) RS-232 DF ANTENNA BEARING PROCESSOR
B-STOCK/SPARE/EXCESS-INVENTORY-WYSIWYG- EXCELLENT CONDITION
The DFP-1010 is a special adaptation of the DFP-1000 DF Bearing Processor intended for applications where the unit is to be operated exclusively by a host computer via RS-232 interface. Although the DFP-1000 has this same RS-232 remote operation capability, it also has a local control/display panel that allows manual operation as well (this panel is blank for the DFP-1010). Aside from this difference, these two units are fundamentally the same. The specific differences are as follows:
1. The DFP-1010 lacks the DFP-1000 local control/display panel and thus cannot be manually operated. Operation can only be done using a host computer via a 19200N81 RS-232 interface.
2. The DFP-1010 does not have the DFP-1000 “Range Tone” feature. (Range Tone is a feature used exclusively in mobile DF tracking and homing applications where the DFP-1000 would normally be preferred over the DFP-1010.)
3. The DFP-1010 does not have a loudspeaker or headset jack. It does, however, retain the Line Audio output feature employed by the DFP-1000. This Line Audio output can be used for audio monitoring and recording.
4. The DFP-1010 GND/AIR and NOR/RCP configuration setup dip-switches (#1 and #3, respectively) are non-functional. Since these functions are more conveniently accomplished in the host computer user-interface software, these two dip-switches have been disabled to avoid possible confusion if one or both of them is incorrectly set.
5. The DFP-1010 lacks a power On/Off switch. As discussed in depth in Appendix K of the appended DFP-1000 Operator’s Manual, the DFP-1010 can be powered-up either directly by simply plugging in the supplied DC power cable and connecting the other end to an 11-16 VDC negative ground power source, or remotely by 0/+5V CMOS logic or an open-collector switching transistor.
Provided that the above differences are recognized and taken into account, the appended DFP-1000 Operator’s Manual is equally applicable to the DFP-1010 in all respects. Users should therefore disregard all references to the manual controls, local operation, display, PDA, Range Tone, loudspeaker, headset, GND/AIR & NOR/RCP dip-switches, and all other topics specific to the DFP1000.
SEE OUR EXCELLENT eBay FEEDBACK & BUY WITH CONFIDENCE
* * * LET US KNOW IF YOU NEED MORE INFORMATION OR PHOTOGRAPHS * * *
* * * WE WILL ONLY SHIP THIS ITEM TO DESTINATIONS WITHIN THE USA
* * *
* * * SAFE & RELIABLE  FREIGHT PACKING & SHIPPING* * *
!!! GOOD LUCK BIDDING !!!
* * * CALL:
+1.303.931.8823
WITH ANY QUESTIONS * * *
SEE OUR EXCELLENT eBay FEEDBACK & BUY WITH CONFIDENCE
This system can be PICKED-UP LOCALLY FREE OF CHARGE, or SHIPPED ANYWHERE IN THE UNITED STATES.
Buyers who have paid for system are invited to inspect the system prior to pickup/shipping
and are eligible for a full refund if inspection does not meet their full satisfaction.
* ABSOLUTELY NO RETURNS OR REFUNDS WILL BE ACCEPTED AFTER THE SYSTEM LEAVES OUR PREMISES.
* No N.A.D's. ("Not As Described") - Come and see the quality for yourself
* No RETURNS - No EXCEPTIONS.
SEE OUR EXCELLENT eBay FEEDBACK & BUY WITH CONFIDENCE
Our store has a perfect record of trust selling the highest quality high-end communication equipment since 1990
Preferred payment method is via direct transfer – If PayPal or CC is used, buyer pays 3.5% PayPal/CC fee
SEE OUR EXCELLENT eBay FEEDBACK & BUY WITH CONFIDENCE