UV RF Vector Impedance SWR Antenna Analyzer PS100 140-2700MHz Similar N1201SA

Description

UV RF Vector Impedance SWR Antenna Analyzer PS100 140-2700MHz Similar N1201SA
Note:
You need to hold down the
second key
and the
fourth key
at the
same time to turn on
Description
This instrument  has  four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis.
N1201SA/PS100 GSM Antenna analyzer Specifications
Frequency                                140MHz~2700MHz
Spacing                                    1kHz
Display                                      2.4inch TFT Pixel 320×240(QVGA)
Battery                                      2000mAH(7.4Wh)
Power dissipation                     <1.5W
Charging current                     400mA
Charging port                          USB(For charging only)
Auto Power Off                        Adjustable(Always on，5mins～60min)
Measure facts                         resistance/reactance/SWR/s11
Resolution ratio                      4bits effective digits
Frequency accuracy              ±5ppm
Connector SMA-K
Measuring range                    impedance   0.1Ω~1000Ω(Absolute value of impedance)
SWR              1.000~65
s11(dB)         0dB~-60dB
Error (single point measurement)          impedance    SWR               s11 （dB/°）   0.1 dB /5° (0dB~-10dB)
1 dB /10° (-10dB~-20dB)
5dB/20° (-20dB~-40dB)
directivity                              <35dB(140MHz~2GHz After calibration)
<30dB(2GHz~2.7GHz)
Scan Points                          280
output level                          -18dBm
Working temperature           0~40
Atmospheric pressure         860hPa~1060hPa
Dimension                           98mm*83mm*28mm
Payment
We accept PayPal only.
We only ship item to your PayPal verified address.
Payment must be received within 3 days from the date of purchase.
Orders will be processed and dispatched within 3 days normally
Terms Of Sales
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international import duties.
2. Import duties,taxes,and charges are not included in the item price or shipping fee.
3. The import duties are buyers' responsibility.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the import duties will be submitted to eBay for solution.
Feedback
Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.Thanks!
Contact Us
We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders.